當前位置:上海埃目斯自動化技術有限公司>>氣體預處理>>閥,連接件>> V3/2-H, MV3/2-H電加熱閥
電加熱閥V3/2-H, MV3/2-H:
Application
In analysis technique, often temperatures
must be kept above the sample gas dew
point. Therefore, it is absoluy necessary to
avoid cold bridges. In order to ensure this,
the temperature regulated M&C three-way
valves V3/2-H and MV3/2 H are used for the
cut-off or switching-over of sample gases and
test gases up to an operating temperature of
180 °C.
Description
The M&C electrically heated valves are fixed
on a mounting plate, decoupled from heat
and covered with an insulated enclosure. The
heater consists of a heating element with
high capacity. The temperature is adjustable
on the integrated thermostat up to 180 °C
with high temperature limiter and low temperature
alarm.
The heat insulated enclosure with a bushing
for the dial thermometer is equipped with
quick acting bentlever closures. The connection
box with integrated thermostat is installed
outside the enclosure on the mounting plate.
Version V3/2-H/PE has got an additional connecting
box for the contact output of the
position identification. The power supply for
the solenoid valves version MV3/2-H is 24V
DC and the additional connecting box is
installed on the mounting plate. In order
to prevent cold bridges, the connecting fittings
are heated by means of thermal conducting
jaws. The electrically heated sample
lines type 3/4/5-N/M/H – see data sheet
3.1 – are fixed with mounting brackets.
請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供,信息內容的真實性、準確性和合法性由相關企業負責,儀表網對此不承擔任何保證責任。
溫馨提示:為規避購買風險,建議您在購買產品前務必確認供應商資質及產品質量。