Electric actuators have become the mainstream of the industrial market

現如今，電動執行器已經成為了工業品市場的主流，這是為什么呢?中英合資企業天蝶閥門帶大家來分析一下電動執行器打動市場的幾個原因吧。
Nowadays, electric actuators have become the mainstream of the market. Why is this?Let sino-British joint venture Tandy Valve take you through a couple of reasons why electric actuators are hitting the market.

（IQC羅托克電動執行器）

首先，在運作效率及節省能源消耗方面，自動控制閥的運用是*的一環，傳統產業界常用的手動閥、氣動閥，在安裝成本及效率上均不及電動閥、電動執行器、電動執行機構。
First,in terms of operating efficiency and saving energy consumption, the use of automatic control valves is an indispensable link. Manual valves and pneumatic valves commonly used in traditional industries are inferior to electric valves in terms of installation cost and efficiency, Electric Actuator, Electric Actuator.

（IQTC羅托克電動蝶閥）

業內有關人士表示，閥類在工業流程上，大多用來控制各種流體的行進及流量，如水、油、化學液體等，所依據的參數有溫度、壓力及流量等。而工廠常用的控制閥有減壓閥、氣動式定溫閥、電磁閥定溫系統、比例式控制閥定溫系統、溫度控制閥等幾種類型。在選用各類自動閥時，應考慮熱機的種類、要求的精度、控制閥的品質、壓降、流量及其構造、故障率、廠家信用和售后服務等因素，才能達到經濟實用的目的。
According to industry sources, valves are used in industrial processes to control the flow and flow of various fluids, such as water, oil, and chemical liquids, based on parameters such as temperature, pressure, and flow. The control valves commonly used in factories include several types such as pressure reducing valves, pneumatic constant temperature valves, solenoid valve constant temperature systems, proportional control valve constant temperature systems, and temperature control valves. When selecting various types of automatic valves, factors such as the type of heat engine, the required precision, the quality of the control valve, pressure drop, flow rate and its structure, failure rate, manufacturer credit, and after-sales service shall be taken into account in order to achieve economical and practical purposes.

（IQC羅托克電動調節閥）

就產品本身而言，因電動閥具備裝配容易、故障率低以及符合業界自動化需求的優點，是業者較劃算的選擇。因為使用一般傳統氣動閥，免不了要有配管、電磁閥及壓縮機等才能匹配，而電動閥是以馬達驅動，安裝簡易省事，且電動閥安裝配合工廠原有的自控線路即可，可節省其他成本支出。此外，以馬達驅動方式開閉較平順，無瞬間沖力過大的缺點，故障率可大幅降低。
As far as the product itself is concerned, it is a more cost-effective choice for operators because of the advantages of easy assembly, low failure rate, and automation requirements in the industry. Because the use of the traditional traditional pneumatic valve, inevitably have to be equipped with piping, solenoid valves and compressors to match, and the electric valve is driven by a motor, easy to install and save, and the electric valve installed with the factory's original automatic control line can save other the costing payment. In addition, the motor drive method is relatively smooth in opening and closing, and there is no short-term impulse overload, and the failure rate can be greatly reduced.

不少人都認為閥門電動執行器貴，使用成本高，其實不然，如果以整體計算，傳統閥要加上許多配件及管路安裝，價格并未占優勢，反而要承擔較多的保養費用。
Many people think that electric valves are expensive and the cost of use is high. Actually, it is not true. If we take the overall calculation, traditional valves must be equipped with many fittings and piping installations. The price is not dominant, but we must bear more maintenance costs.

現在的一個趨勢就是正不斷的在各各領域中應用各種不同的電動執行器。毫無疑問的，這個趨勢會發展的越來越廣泛，使我國真正進入到一個“工業智造”的時代。
One current trend is the constant application of various electric actuators in various fields.Without doubt,this trend will develop more and more widely, so that China will truly enter an era of "industrial wisdom".