VEGAVIB S 61 

Vibrating level switch for granulates 
Easy setup without adjustment 
Product-independent switching point 
Optimum rod design avoids buildup and jamming 
Easy cleaning 
Wear and maintenance free 

Function 
The vibrating rod of VEGAVIB is energized by a piezo crystal and it vibrates at a fixed amplitude. If the vibrating rod is covered by product, the amplitude change is detected by the integral electronics and converted into a switch signal. The switching condition is visible from outside via a two colour LED. No special adjustments are required to set up VEGAVIB S 61.

Area of application 

VEGAVIB S 61 is used as a level switch in free flowing powders, granulates and coarse grained solids and detects reliably and accuray when a point level is reached. The optimum rod design avoids jamming and buildup of bulk solid material. It is ideal as a high or low level switch in a vessel detecting foodstuffs, perishable or granulate materials,which could be retained in a fork solids level probe. 

Technical data

Accessories:Sliding lock fitting (extended versions) pressurised or unpressurised for adjustable switch point

VEGAVIB S 61
振動極限開關，用于顆粒狀的固料
安裝方便, 無需調整
產品獨立開關點
優化桿設計避免了堆積和干擾
易清洗

功能
VEGAVIB 的振動桿由壓電晶體激發, 并以固定振幅振動。如果振動桿被產品覆蓋, 則通過整體電子學檢測振幅變化并轉換成開關信號。開關情況從外面是可看見的通過LED指示燈顯示。設置 VEGAVIB S 61 不需要進行特殊調整。

應用領域
VEGAVIB S 61 在自由流動的粉末、顆粒和粗粒固體中被用作電平開關, 并在達到點水平時進行可靠和準確的檢測。*桿設計避免了大塊固體材料的干擾和堆積。它是理想的作為一個高或低電平開關的船舶檢測食品, 易腐或粒材料, 這可以保留在一個叉子固體水平探頭。

技術資料

附件: 滑動鎖配件 (擴展版) 加壓或 unpressurised 可調開關點

以上即為VEGA VIB S61 6263的相關介紹，如有任何技術咨詢或需要相關技術資料，請前往相關頁面進行下載。