當前位置：波司特精密儀器（上海）有限公司>>傳感器>> 電位式位移傳感器5
用于直接和精確測量機械位移，橫向無力驅動，壽命非常長，高位移速度
| 型號 | 8710, 8711 |
| 量程范圍 | |
| 信號輸出類型 | 取決于傳感器激勵供電電壓 |
| 保護等級 | IP40 |
| 工作溫度 | -30°C...+100°C |
| 激勵供電電壓 | 取決于量程范圍 |
| 復位彈簧 | 無，需機構帶動復位 |
| 具體特征 |
|
Displacement sensors models 8710 and 8711 with resistance tracks made of conductive plastic material are designed for a direct and accurate measuring of mechanical displacements. A special ball joint coupling is mountable on both ends of the driving rod. Because of this the sensor may be used free of clearance or lateral forces also with angular or parallel misalignment between sensor and measuring device.
A special multi-fingered slider provides a good electrical contact also at high adjustment speeds or vibrations.
Areas of application are:
Due to the technology employed in potentiometric displacement sensors, they always operate with a sliding contact system. Special processes are applied to give the resistance tracks low friction, low tendency to stick/slip, resistance to abrasion and long-term stability.
The driving rods are guided in long-life, low-friction sliding bearings with close tolerances; this results in highly precise measurements. Lateral forces reduce the service life and can be avoided by using, for instance, ball joint couplings, included in the burster product range.
Due to the pump effect, the driving rod has double sliding bearings.
Mounting
The sensor is mounted at the left and right longitudinal slot by four mounting angles.
These slots (W = 2.2 mm, D = 1.6 mm) are closed at the side of the electrical connector.
8710/8711參數資料 請輸入賬號
請輸入密碼
請輸驗證碼
以上信息由企業自行提供，信息內容的真實性、準確性和合法性由相關企業負責，儀表網對此不承擔任何保證責任。
溫馨提示：為規避購買風險，建議您在購買產品前務必確認供應商資質及產品質量。
儀表網