德國ADwin

該公司耶格爾Computergesteuerte測量技術有限公司開發的客戶軟件進行快速和動態試驗臺和生產設施。該ADWIN硬件可用自1989年以來。該公司總部設在城市的洛爾施設在法蘭克福/ Main和曼海姆之間的萊茵河谷。

五十高素質的員工致力于為您提供：

耶格爾員工測量技術銷售，和項目部為客戶提供專業和具體的支持實現與應用ADWIN

我們ADWIN系統的增強.如今，該公司耶格爾測量技術有限公司和ADWIN站 - 主要是在汽車行業 - 快速測量數據采集與極快的響應時間。在我們的客戶是眾多企業。

深圳市普索進出口貿易有限公司

：王

：

：

：

型號列表 

ADwin-Gold

ADwin-GoldII

ADwin-Pro

ADwin-ProII

ADwin-light-16

HSM-24V

ADbasic

TiCoBasic

ADtools

ADsim

ADlog

ADwinDriver

ADwinWeb Interface

ADwinand PLC

ADwinand Linux

ADwinServices

ADbasicTraining

ADwin-GoldII

GoldII-CNT 4x 32-bit up/down counters (RS422), 4-edge evaluation,

clock/direction,simultaneous period width measurement

4xSSI decoders, 6x PWM outputs

GoldII-CAN 2x CAN-Bus, 2x RS232/485

GoldII-CAN-LS 2x CAN-Bus (Low-Speed), 2x RS232/485

Gold II-DA4 Option: 4 analog outputs, 16-bit DAC(3μs)

Gold II-DA8 Option: 8 analog outputs, 16-bit DAC(3μs)

GoldII-Boot Bootloader option, for Ethernet, for stand-alone operation without PC

EEPROMparameter memory, fetch / write support for S7 SPS

GoldII-Storage-16 Memory card 16 GB flash memory, real-time clock

GoldII-Profibus 1x Profibus-DP Slave interface, 9pin D-SUB socket

GoldII-DeviceNet 1x DeviceNet slave interface, 5pin DeviceNet screw-type connector

GoldII-EtherCat 1x EtherCat slave interface, RJ45 connector

ADwin-Gold

Systemfeatures ADwin-Gold :

1processor ADSP21062, 32-bit, 40MHz, 256KB int./16MB ext. RAM,

1xevent input

16analog inputs ± 10V multiplexed to 2x 16-bit ADC (5μs),

2x14-bit ADC (0.5μs), 2 analog outputs ± 10V 16-bit DAC (3μs),

16digital inputs, 16 digital outputs,

supplyvoltage range 10-35V

ADwin-Gold-ENETADwin-Gold with Ethernet interface (10/100 MBit/s)

BNCsockets for analog signals

ADwin-Gold-D-ENETADwin-Gold with Ethernet interface (10/100 MBit/s)

D-SUBsockets for analog signals

ADwin-Gold-USBADwin-Gold with USB interface

BNCsockets for analog signals

ADwin-Gold-D-USBADwin-Gold with USB interface

D-SUBsockets for analog signals

ADwin-GoldOptions (Options for the standard system, later upgrading is not possible)

Gold-CO14x 32-bit up/down counter (RS422), 4-edge evaluation,

clock/direction,period width measurement

Gold-CANOption for ADwin-Gold-D : 2x CAN-Bus, 2x RS232/485,

4xSSI decoder

Gold-CAN-LSOption for ADwin-Gold-D : 2x CAN-Bus Low-Speed, 2x RS232/485,

4x SSIdecoder

Gold-DAOption: 6 additional analog outputs, 16-bit DAC (3μs)

Gold-BootBootloader option, for Ethernet, for stand-alone operation without PC

EEPROMparameter memory, fetch / write support for S7 SPS

Gold-MEM64Memory expansion from 16MB ext. memory to 64MB and

memoryexpansion from 256KB int. memory to 512KB

ADwin-light-16

Systemfeatures ADwin-L16:

1processor ADSP21062, 32-bit, 40MHz, 256KB / 16MB RAM, 1x event input,

8analog inputs ± 10V multiplexed to 16-bit ADC (2μs),

2 analog outputs ± 10V 16-bit DAC (3μs),

6 (4) digital inputs, 6 digital outputs,

2x32-bit impulse counters (TTL), 1x LS-Bus

ADwin-L16-PCIADwin-L16 as PC plug-in board 1 Slot

USBinterface to the PC

ADwin-L16-EXTADwin-L16 in an external industrial enclosure (226x109x44 mm)

USBinterface to the PC, supply voltage range 10-35V

ADwin-L16-EXT-ENETADwin-L16 in an external industrial enclosure (226x109x74 mm)

Ethernetinterface (10/100 MBit/s) to the PC, supply voltage range 10-35V

ADwin-L16-EUROADwin-L16 as Euro-size board 5 TE

USBinterface to the PC

ADwin-L16-EURO-ENETADwin-L16 as Euro-size board 10 TE

Ethernetinterface (10/100 MBit/s) to the PC

ADwin-light-16Options (Options for the standard system, later upgrading is not possible)

L16-DIO11x CAN-Bus, 32 TTL-I/Os configurable in groups of 8,

2x32-bit up/down counter (RS422), period width measurement,

1xSSI decoder

L16-DIO1-LS1x CAN-Bus Low-Speed, 32 TTL-I/Os configurable in groups of 8,

2x32-bit up/down counter (RS422), period width measurement,

1xSSI decoder

L16-DIO232 TTL-I/Os configurable in groups of 8,

2x32-bit up/down counter (1x TTL, 1x RS422), period width measurement,

1xSSI decoder

L16-DIO332 TTL-I/Os configurable in groups of 8

L16-PWM11x PWM output, 1x SPI master

L16-CO11x 32-bit up/down counter (TTL), 4-edge evaluation instead of

2x32-bit impulse counters (TTL), (not with L16-DIO1, L16-DIO2 options)

L16-MEM512kMemory expansion from 256KB int. memory to 512KB

L16-BootBootloader option for Ethernet, for stand-alone operation without PC

EEPROMparameter memory, fetch / write support for S7 SPS

Processors+ Options (Options, later upgrading is not possible)

Pro-CPU-T11-ENET 1 Prozessor ADSP, 32-bit, 300MHz,768KB int./256MB ext. RAM, 1x event input,

1Ethernet interface (10/100MBit/s) for communication with the PC

Pro-BootBootloader option, for Ethernet, for stand-alone operation without PC

EEPROMparameter memory, fetch / write support for S7 SPS

Enclosures

ADwin-Pro?? 19“ enclosure (84 HP, 3U), AC power supply 115/230V

14-16slots, desktop unit, all modules mounted from the frontside

ADwin-ProII-BM 19“ enclosure (84HP, 3U), AC power supply 115/230V

13-15slots, desktop unit, all modules mounted from the backside

ADwin-ProII-DC 19“ enclosure (84HP, 3U), DC-DC converter 10-35V

14-16slots, desktop unit, all modules mounted from the frontside

ADwin-ProII-light ½ 19“ enclosure (42HP , 3U), AC power supply 115/230V

7slots, desktop unit, all modules mounted from the frontside

ADwin-ProII-light-

DC

½ 19“enclosure(42HP, 3U), DC-DC converter 10-35V

7slots, desktop unit, all modules mounted from the frontside

ADwin-ProII-mini Enclosure (25HP, 3U), DC-DC converter 10-35V

4-5slots, desktop unit, all modules mounted from the frontside

Jäger

AnalogInputs with Multiplexer

ProII-AIn-32/18-D 32 SE or 16 diff. analog inputs ±10V, isolated by optocouples

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub

ProII-AIn-32/18-DTiCo

32SE or 16 diff. analog inputs ±10V, isolated by optocouples, TiCo ,

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub

Pro II-AIn-8/18 8 analog inputs ± 10V

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, LEMO-1pin

Pro II-AIn-8/18-D 8 analog inputs ± 10V

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub

ProII-AIn-8/18-8B 16 analog inputs (8x 8B signal conditioning)

18-bitADC (2μs), block measurement, limit monitoring, DSub, 15HP

ProII-AIn-16/18-8B 16 analog inputs (16x 8B signal conditioning)

18-bitADC (2μs), block measurement, limit monitoring, DSub, 15HP

ProII-AIn-16/18-C 16 diff. current inputs 0..20mA, 500 W Shunt (0.05%, TK10),

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring, DSub

AnalogInputs with Multiplexer, with Filter, ±10V / ±30V

ProII-AIn-8/18-

LP5

8analog inputs, cut-off frequency 5kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±10V, LEMO-1pin, 10HP

ProII-AIn-8/18-

LP5-D

8analog inputs, cut-off frequency 5kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±10V, Dsub, 10HP

ProII-AIn-8/18-

LP50-TiCo

8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±10V, LEMO-1pin, 10HP, TiCo

ProII-AIn-8/18-

LP50-D-TiCo

8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±10V, Dsub, 10HP, TiCo

ProII-AIn-8/18-

LP-30V

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±30V, LEMO-1pin, 10HP

ProII-AIn-8/18-

LP-30V-D

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±30V, DSub, 10HP

ProII-AIn-8/18-

LP-30V-TiCo

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit monitoring

measurementrange ±30V, LEMO-1pin, 10HP, TiCo

ProII-AIn-8/18-

LP-30V-D-TiCo

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

18-bitADC (2μs), MUX 2μs, block measurement, limit

ProII-AIn-F-4/16 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, LEMO-1pin

ProII-AIn-F-4/16-D 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, DSub

ProII-AIn-F-4/16-B 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, BNC

ProII-AIn-F-4/16-L2 4 analog inputs ±10V, 4x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, LEMO-2pin

ProII-AIn-F-8/16 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, LEMO-1pin

ProII-AIn-F-8/16-D 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, DSub

ProII-AIn-F-8/16-B 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, BNC, 10HP

ProII-AIn-F-8/16-L2 8 analog inputs ±10V, 8x 16-bit ADC (250 ns), 256MB RAM

averaging,min-/max, limit monitoring, LEMO-2pin

AnalogInputs, Parallel Acquisition, 16-bit, with Filter, ±10V / ±30V

ProII-AIn-F-8/16-

LP50

8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±10V, LEMO-1pin, 10HP

ProII-AIn-F-8/16-

LP50-D

8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±10V, DSub, 10HP

ProII-AIn-F-8/16-

LP50-B

8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±10V, BNC, 10HP

ProII-AIn-F-8/16-

LP50-L2

8analog inputs, cut-off frequency 50kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±10V, LEMO-2pin, 10HP

ProII-AIn-F-8/16-

LP-30V

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±30V, LEMO-1pin, 10HP

ProII-AIn-F-8/16-

LP-30V-D

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±30V, DSub, 10HP

ProII-AIn-F-8/16-

LP-30V-B

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limit monitoring, 256MB RAM

measurementrange ±30V, BNC, 10HP

ProII-AIn-F-8/16-

LP-30V-L2

8analog inputs, cut-off frequency 10kHz , low-pass 4th order Butterworth

8x16-bit ADC (250ns), averaging, min-/max, limi