Digital Force Gauges with RS-232 interface Accuracy: +/-0.15% of full scale
Capacity: Several models available with capacities from 2 lb to 500 lb The DFIS Series digital force gauge is extremely easy to setup, operate and maintain. Using a simple four push button membrane keypad, users can quickly access peak values, reset zero, tare and select engineering units in lb, kg or N. A large, easy-to-read LCD display displays current values, peak values, gauge settings and battery status. The DFIS samples at 1000Hz and includes a bi-directional RS232 serial data output and a modified BCD Mitutoyo output. The RS232 allows you to interface your gauge to a motorized test stａnd operating with our NEXYGEN?automation software for a complete, economical testing system. Each DFIS Chatillon force gauge comes with a carrying case, battery charger, removable load cell shaft and a set of stainless steel attachments- flat, hook, cone, chisel, v-notch and extension rod. Note that the DFIS-series force gauges are replaced by (yet is still completely compatible with) Chatillon's new E-DFE series force gauges |
Quick Specs: - Tare Capacity: 10% of full scale in pound mode
- Full Scale Deflection: 0.010
- Temperature: 40?to 110癋 (5癈 to 45癈), Stability: 0.03% per 癋
- Weight: Instrument: 2 lbs (6 lb shipping weight)
- Simple Pushbutton Operation
- Rugged All-Metal Housing
- User-selectable Capacities in lb, kg and N
- 1000Hz Sampling Rate
- RS232 Serial Data Communications
- Hand-held or Test Stａnd Applications
- Die cast metal reversible housing. Split housing design permits upright display whether gauge is hａnd held or test stａnd mounted.
- Easy to read 1/2 high LCD display with 4-1/2 digits for forced value. Smaller characters within the display indicate units of measurement, test mode and low battery
- 4 key membrane keypad with separate on/off switch
- Removable load cell shaft: 2 lb through 100 lb: #10-32 thread, 200 lb & 500 lb: 5/16-18 thread
|
會(huì)員1.png)
