Proline Promass I 500
科里奧利質量流量計
質量流量計i500, 8I5B80, DN80 3"
質量流量計i500, 8I5B50, DN50 2"
質量流量計i500, 8I5B25, DN25 1"
質量流量計i500, 8I5B15, DN15 1/2"
質量流量計i500, 8I5B08, DN08 3/8"
質量流量計i500, 8I5B51, DN50 2"FB
質量流量計i500, 8I5B26, DN25 1"FB
同時進行在線粘度測量和流量測量，搭配最多帶4路輸入/輸出的分體式變送器
Promass I直單管設計實現了質量流量、密度、溫度，以及在線粘度測量的有效結合。Promass I 500配備了創新型分體式變送器，限度地提高了苛刻環境中的安裝靈活性和操作安全性。心跳技術（Heartbeat Technology）始終確保合規性與過程安全。
測量誤差
質量流量（液體）：±0.10 %
體積流量（液體）：±0.10 %
質量流量（氣體）：±0.50 %
密度（液體）：±0.0005 g/cm³
測量范圍
0...180 000 kg/h (0...6600 lb/min)
介質溫度范圍
–50...+150 °C (–58...+302 °F)
過程壓力
PN 100，Cl. 600，63K
接液部件材質
測量管：9級鈦
連接部件：2級鈦
優勢
節能：通徑結構設計保證最小壓損
較少過程測量點：多參數測量(流量、密度、溫度)
節省安裝空間：無前/后直管段長度要求
完整查看過程信息和診斷信息：提供多種用戶自定義輸入/輸出組合方式和現場總線
降低復雜性和多樣性：用戶自定義輸入/輸出功能
自帶驗證功能：內置Heartbeat Technology (心跳技術)
應用領域
儀表特點
自排空的單直管測量系統
TMB 技術
測量管材質：鈦
分體式儀表，最多帶4路輸入/輸出
背光顯示，觸摸鍵控制和WLAN訪問
傳感器和變送器通過標準電纜連接
測量原理不受流體物理特性的影響(例如：粘度和密度)。
在低壓損要求和敏感性流體測量應用中進行液體和氣體測量。
特征和規格
Density/Concentration
氣體
粘度
密度
液體
測量原理
科里奧利質量流量
產品標題
Combines in-line viscosity and flow measurement with a transmitter remote version with up to 4 I/Os. Measuring liquids and gases in applications requiring low pressure loss and gentle fluid treatment.
傳感器特點
Energy-saving – full bore design enables minimal pressure loss. Fewer process measuring points – m*riable measurement (flow, density, temperature). Space-saving installation – no in/outlet run needs. Straight, easy-to-clean single-tube system. TMB technology.
變送器特點
Full access to process and diagnostic information – numerous, freely combinable I/Os and fieldbuses. Reduced complexity and variety – freely configurable I/O functionality. Integrated verification – Heartbeat Technology. Remote version with up to 4 I/Os. Backlit display with touch control and WLAN access.
公稱口徑范圍
DN 8 to 80 (? to 3")
接液部件材質
Measuring tube: Titanium grade 9
Connection: Titanium grade 2
測量變量
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration, viscosity
測量誤差
Mass flow (liquid): ±0.10 %
Volume flow (liquid): ±0.10 %
Mass flow (gas): ±0.50 %
Density (liquid): ±0.0005 g/cm³
測量范圍
0 to 180 000 kg/h (0 to 6600 lb/min)
過程壓力
PN 100, Class 600, 63K
介質溫度范圍
–50 to +150 °C (–58 to +302 °F)
環境溫度范圍
Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140 °F)
傳感器外殼材質
1.4301 (304), corrosion resistant
Sensor connection housing (standard): AlSi10Mg, coated
Sensor connection housing (option): 1.4301 (304); 1.4404 (316L); 1.4409 (CF3M) similar to 316L
變送器外殼材質
AlSi10Mg, coated; 1.4409 (CF3M) similar to 316L; Polycarbonat
防護等級
Sensor remote version (standard): IP66/67, type 4X enclosure
Sensor remote version (option): IP69. Transmitter remote version: IP66/67, Type 4X enclosure
顯示/操作
4-line backlit display with touch control (operation from outside)
Configuration via local display and operating tools possible
輸出
4 outputs:
4-20 mA HART (active/passive)
4-20 mA WirelessHART
4-20 mA (active/passive)
Pulse/frequency/switch output (active/passive)
Double pulse output (active/passive)
Relay output
輸入
Status input
4-20 mA input
數字通信
HART, PROFIBUS DP, PROFIBUS PA, FOUNDATION Fieldbus, Modbus RS485, Profinet, Ethernet/IP, OPC-UA
電源
DC 24 V
AC 100 to 230 V
AC 100 to 230 V / DC 24 V (non-hazardous area)
防爆認證
ATEX, IECEx, cCSAus, NEPSI, INMETRO, EAC
產品安全性
CE, C-tick, EAC marking
功能安全性
Functional safety according to IEC 61508, applicable in safety-relevant applications in accordance with IEC 61511
計量認證和證書
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for traceable verification according to ISO 9001:2008 – Section 7.6 a (TÜV attestation)
壓力認證和證書
PED, CRN
材料證書
3.1 material
衛生型認證和證書
3-A, EHEDG, cGMP
會員1.png)
