當前位置：杰特電子科技（鎮江）有限公司>>keller壓力變送器>>微型壓力傳感器 M5

微型壓力傳感器 M5

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質代理商

所在地

在線詢價收藏產品

聯系方式：張蒼慈查看聯系方式

更新時間：2022-05-17 14:44:03瀏覽次數：157次

聯系我時，請告知來自儀表網

產品分類 品牌分類

  keller壓力變送器

全部產品列表

  其他品牌

杰特電子科技（鎮江）有限公司

經營模式：代理商

商鋪產品：130條

所在地區：江蘇鎮江市

聯系人：張蒼慈（經理）

詢價 給他留言

產品簡介

微型壓力傳感器M5Ultra-FastMiniaturePressureTransducerSeriesM5Bandwidth50kHz/Resistantupto200°CThepiezoresistivepressuretransducersSeriesM5areideal

詳細介紹

微型壓力傳感器 M5

Ultra-Fast Miniature Pressure Transducer Series M5

Bandwidth 50 kHz / Resistant up to 200 °C

The piezoresistive pressure transducers Series M5 are ideal, thanks to the M5 fine thread, for taking measurements at close proximity in places where access is a problem and in very thin pipes – exactly the kinds of conditions associated with engine test benches. The front-flush design prevents gas bubbles interfering with fluid measurements and supports measurements up to 200 °C without a cooling adapter. The extreme dynamic range of 0…50 kHz makes it possible to record very fast pulsations just as reliably as those associated with static pressure values. A vibration-resistant Teflon FEP cable (IP67) ensures the 80 mV output signal is routed securely out of the hot environment and then onwards for processing.

Sensor technology
The Series M5 sensor incorporates a stable silicon sensor which is backside-soldered directly to a supporting element designed for excellent fluid dynamics. This construction eliminates the disadvantages of sealants, adhesives, separating membranes or capillary tubes in high temperature environments. The practically-flush connection to the measurement media is critical to the excellent dynamic range of 0…50 kHz. The micromechanical design delivers absolute measuring ranges of 3, 10 and 30 bar, overpressure protection of up to 5 times measuring range
ａnd effective isolation of mounting forces, and a very low dead volume.

Conditions of use
Thanks to the materials used in the pressure connection (silicon oxide, stainless steel, and gold), the pressure transducers in the M5 series offer excellent media compatibility. They are designed for operating temperatures between -50 °C and +180 °C and come with a typical output signal range of 80 mV (based on a 1 mA supply) and an individual calibration certificate. The unit which incorporates a remote measurement amplifier is known as the Series M5 HB (see the data sheet) ａnd can achieve a total error bａnd of ± 1 %FS for the operating temperature range.

Performance characteristics
? Sensor head capable of exposure to 200 °C
? Broad compensated temperature range, with a choice of either -20…125 °C or -40…180 °C
? Excellent dynamic response, up to 50 kHz (pulsation measurements)
? Insensitive to structure-borne vibration
? Extremely compact design, pressure connection: M5 x 0,5 fine thread
? Teflon FEP cable with IP67 ferrule, suitable for use on test benches
? Pressure ranges of 3 bar, 10 bar and 30 bar (absolute)

Pressure ranges	3 bar, 10 bar and 30 bar abs.
Linearity (best fitted straight line)	typ. ± 0,2 %FS
Pressure hysteresis	max. 0,05 %FS
Temperature hysteresis	max. 0,2 %FS