進口內螺紋高壓針型閥

進口內螺紋高壓針型閥 此閥德國制造，有內螺紋形式，外螺絲紋形式，卡套式及焊接式。公稱壓力：PN2.5 PN4 PN6.4 PN16 32Mpa 70MPa 100MPa 140MPa 美標高壓針型閥公稱通徑：DN5～DN25適用介質：油﹑水﹑氣等多種非腐蝕性或腐蝕性介質 適用溫度：-20℃～+440℃ -70℃～240℃ ≤540℃ ≤570℃等 美標高壓針型閥制造材料：20#﹑1Cr18Ni9Ti﹑304﹑316﹑316L﹑12Cr1Mov等。

      type high pressure needle valve, American standard type ultrahigh pressure inside and outside thread the needle valve This valve is generic in the United States, can replace imported products, there are internal thread forms, outside screw lines form, shell and welded. Nominal pressure: PN2.5 PN4 PN6.4 PN16 32 mpa 70 mpa to 100 mpa to 140 mpa standard type high pressure needle valve nominal diameter: DN5 ~ DN25 applicable medium: oil, water, gas and other non corrosive or corrosive medium applicable temperature: - 20 ℃ ~ + 440 ℃ to 70 ℃ ~ 440 ℃ 540 ℃ 570 ℃ or less or less beautiful mark type high pressure needle valve manufacturing materials such as: 20 #, 1 cr18ni9ti, 304, 304, 316 l, 12 cr1mov, etc.

·         特殊功能：快速型

·         工作溫度區間：常溫閥-29℃

·         外形尺寸：50*50mm

·         公稱通徑：DN5～DN25mm

·         材質：碳鋼,不銹鋼

·         重量：5kg

·         型號：OR系列

·         品牌：德國奧爾申

·         驅動方式：手動閥

·         作用和用途：針型閥

·         結構特征：截門形

·         閥體材質：合金鋼閥

·         連接形式：螺紋連接

·         開關方向：角行程

·         壓力環境數值：1.6-50.0MPa

·         壓力環境類型：超高壓閥PN>100.0Mpa

北京巨元閥門有限公司
 ：
：


： 
：
北京巨元閥門有限公司主營：進口安全閥、船用閥、進口底閥、進口電磁閥、進口調節閥、進口蝶閥、進口隔膜閥、進口過濾器、進口減壓閥、進口漿液閥、進口角閥、進口節流閥、進口截止閥、進口控制閥、進口脈沖閥、進口排氣閥、進口平衡閥、進口球閥、進口疏水閥、進口視鏡、進口衛生閥、進口旋塞閥、進口閘閥、進口止回閥、進口柱塞閥