ADSS光纜用于高壓輸電線路并利用電力系統輸電塔桿，整個光纜為非金屬介質，自承懸掛于電力鐵塔上電力強度zui小的位 置。它適用于已建高壓輸電線路，具有安全性高，無電磁/強電干擾，跨距大，深受廣大電力系統用戶的青睞。湖南ADSS光纜價格ADSS-16B1-600M-PE ADSS-12B1 ADSS參數在電力系統城網改 造、農網改造的通信建設中得到廣泛的應用。 ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT
湖南ADSS光纜價格ADSS-16B1-600M-PE ADSS-12B1 ADSS參數
·產品特點 Characteristics
·可不斷電架設
· Can be installed without shutting off the power
·采用AT護套，耐電痕性能*
· Excellent AT performance, The maximum inductive at the operating point of AT sheath can reach
25kV
·重量輕、纜徑小，減少了冰凌、風力影響和對塔架、支撐物的負荷
· Light weight and small diameter reducing the load caused by ice and wind and the load on towers
and backprops
·跨距大，zui大跨距超過1000m
· Large span lengths and the largest span is over 1000m
·具有優異的抗拉性能和溫度特性 ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT
· Good performance of tensile strength and temperature
·預期壽命可達30年
· The design life span is 30 years
ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT
·產品應用 Application
ADSS光纜的設計充分考慮了電力線路的實際情況，適用于不同等級高壓輸電線路。對于10kV和35kV的電力線路可采用聚乙烯（PE）護套；對于110kV和220kV的電力線路則必須通過計算電場場強分布來確定光纜掛點并采用耐電痕（AT）外護套。 ADSS-12B1-100-PE/AT ADSS-24B1-300M-AT同時，精心設計芳綸的用量和完善的絞合工藝以滿足不同跨距的應用要求。
The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans。
ADSS光纜|OPGW光纜|ADSS非金屬自承式光纜|OPGW電力光纜|光纜企業|光纖公司|光纖光纜|室外光纜|非金屬光纜|ADSS光纜|OPGW光纜|多模光
ADSS光纜|OPGW光纜|ADSS非金屬自承式光纜|OPGW電力光纜|光纜企業|光纖公司|光纖光纜|室外光纜|非金屬光纜|ADSS光纜|OPGW光纜
