進口氣動管夾閥Pneumatic Pinch Valve
概述：進口氣動管夾閥是以氣動裝置為驅動源，可以實現遠程控制的管夾閥。可廣泛應用于礦山、冶煉廠、水泥廠、污水處理廠、介質輸送管道。
Summary: imported pneumatic tube pinch valve is a pneumatic device to drive source, can realize the remote control of the pipe clamp valve. Can be widely used in mines, smelters, cement plants, sewage treatment plant, medium conveying pipeline.
結構組成：由氣動裝置、左右鑄鐵、碳鋼、不銹鋼閥體、橡膠管套、大小閥桿、閘板、上下導柱等零件組成，
Structure: by the pneumatic device, or cast iron, carbon steel, stainless steel body, the rubber sleeve, the size of the stem, gate, upper and lower guide pillars and other parts,
進口氣動管夾閥工作原理：在控制介質未輸入時，膠套和閥體之間的空腔與大氣連通，膠套受流體壓力處于向外張緊狀態。由于管套內有一定角度排列的增強簾布層，使管套軸向和徑向壓力相互平衡，所以管套的長度與直徑不會因流體壓力而變化。當控制介質進入管套與閥體之間的空腔時，管套在介質壓力下變形截流。
Imported pneumatic tube pinch valve working principle of: in control medium without input, cavity and air between the rubber sleeve and the valve body is communicated, the rubber sleeve by the fluid pressure in the outward tension. Because the sleeves with reinforcing ply angle is arranged, make the tube axial and radial pressure balance each other, so the length and diameter of pipe not because of fluid pressure changes. When the control medium into the cavity between the sleeve and the valve body, closure deformation under pressure in the medium.
產地：德國  Origin: Germany
產品品牌：德國Orsen奧爾申 The product brand: German Orsen