EM-TEST（EM測試） ESD NX30 30KV靜電放電模擬器
產品名稱：
30KV靜電放電模擬器
產品型號：
ESD NX30
廠商名稱：
EM TEST(EM測試)
產品屬性：
主機
商品描述：
空氣放電和接觸放電的測試電壓可達30kV，放電頻率可達25Hz，可方便更換的R/C網絡和放電頭，交流電源供電和直流供電，可用電池供電。
Highlights
Test voltage up to 30 kV for air and contact discharge
Color touch display
Discharges up to 25 Hz
80 easy-to-change R/C-networks and tips
Switchable Bleed-Off function
Built-in activity log
AC mains supply and DC supply
Battery tested to 30,000 pulses @30 kV
Built -in selftest function
USB-interface
Control and analyzing-software for Windows 7
Optional fiber optic link between esd NX30 and computer (USB port)
Application
esd NX30 - Generates ESD pulses above EN/IEC 61000-4-2 test levels
Electrostatic discharges either from a human body to any other part or between two different objects can cause persistent disturbances or even destruction to sensitive electronics or controls.
esd NX30 is an ESD tester to simulate ESD pulses at higher voltages up to 30 kV in both air and contact discharge mode. It therefore satisifies requirements exceeding the EN/IEC 61000-4-2 test levels and complies to automotive test applications.
Standards
BMW 600 13.0 (Part 2)
BMW GS 95002 (2010)
DaimlerChrysler DC-10613
DaimlerChrysler DC-10614
DaimlerChrysler DC-11224
EN 61000-4-2
Ford EMC-CS-2009.1
Ford ES-XW7T-1A278-AC
Ford FMC1278
GMW 3097
GMW 3097 (2001)
GMW 3097 (2004)
GMW 3097 (2006)
GMW 3100
GMW 3100 (2001)
Hyundai/Kia ES 96100-02 (2006)
IEC 61000-4-2
IEC 61326
ISO 10605
JASO D001-94
Mazda MES PW 67600
AV EMV
MIL STD 461 G CS 118
Mitsubishi ES-X82010
Nissan 28401 NDS 02
Porsche
PSA B21 7110 Rev.C, Ad. 2010-05
Renault 36.00.808/--D
Renault 36.00.808/--E
Renault 36.00.808/--F
Renault 36.00.808/--G
Renault 36.00.808/--H
Renault 36.00.808/--J
Renault 36.00.808/--K
SAE J1113-13
SAE J1455
Smart DE1005B
VW TL 824 66
Benefits
The esd NX30 electrostatic discharge simulator is an easy-to-use tester. It consists of a power supply unit and the discharge gun, operated from the discharge gun. It generates electrostatic discharges up to 30 kV in both air and contact discharge mode. The discharge tips can easily be changed. The discharge networks can be easily changed as they are plugged into the discharge gun. The actual discharge network in use is recognised by the controls and indicated in the display.
The esd NX30 is either mains supplied or supplied by a DC source. Even battery powered operation is possible. Battery operation becomes relevant for testing e.g. as per DC-11224 or VW TL 824 66, ESD Operating Test, where the ground of the ESD generator is connected to the Field Coupling Plane and the Horizontal Coupling plane but not directly to the Reference Ground Plane. Additionally, a fiber optic link is offered as an option to communicate with the esd NX30 separating the sensitive computer from the test set-up and to avoid ground loops.
Software
esd.control - More than a remote control and documentation software
esd.control goes far beyond being just a remote control and documentation software. It is your ESD Test Manager from A to Z. It covers the preparation of the test (definition of the test plan, including all test points and the generation of test notes), test routine programming, collection of test data and full documentation of every step. esd.control is the state-of-the-art software tool for ESD testing.
An optional fiber optic link is offered to communicate with the esd NX30 separating the sensitive computer from the test set-up and to avoid ground loops.
