光電復合電力電纜 OpticalPower Composite Cable

OPLC電纜 OPLCcables

一、適用范圍

本產品適用于工頻額定電壓0.6/1 kV及以下電壓等級，光纖接入的智能電網和多網融合配網用電纜

Range ofapplication

This product can be applied into intelligent power network with0.6/1 kV and below power frequency voltage and optical-fiberaccess，ａnd also can be used for power distribution in multi-network integrations .

二、執行標準

GB/T29839-2013   額定電壓1kV(Um=1.2kV)及以下光纖復合低壓電纜

Executive standard

GB/T 29839-2013  rated voltage up to and including 1k(Um=1.2kV)optical fiber composite low voltage cables

三、使用特性

1.工頻額定電壓Uo/U/(U m)為0./1kV、系統**電壓Um為1.2 kV。

2.交聯交聚乙烯絕緣電纜導體的長期允許**工作溫度為90℃，聚氯乙烯絕緣電纜導體的長期允許**工作溫度為70℃。

3.聚氯乙烯絕緣電纜短路時(最長持續時間不超過5s)電纜導體的**溫度不超過160℃，交聯聚乙烯電纜短路時 (最長持續時間不超過5s)電纜導體的**溫度不超過250℃。

4.電纜敷設時環境溫度不低于0℃。

Operating characteristics

1.The power frequency rated voltage Uo/U(Um) is 0.6/1kV,andsystem maximum voltage is 1.2kV. 

2. Max.long-term allowable working temperature for the XLPEinsulated cable conductor is 90C;Max.long-term allowable working temperature for the PVCinsulated cable conductor is 70℃;

3.Max.temperature of conductor can't exceed 160℃ in shortcircuit for PVC insulated cables(Max.duration 1ess than 5s);Max.temperature of conductor can't exceed 250℃ in short-circuit for XLPEinsulated cables(Maxduration less than 5s)

4. Ambient temperature can't be minus in cable laving.

四、型號及規格 Type and specification

五、結構示意圖 Structure diagrammatic drawing