本機器適用于各種連接器之插入力及拔出力測試
This tester can overcome the clamp problem of connectors and perform automatic alignment of male and female connectors during the test without single-sided aligning defect.
WINDOWS中文窗口版軟件畫面設定，操作簡方便，快速易學，且所有數據皆可
儲存(試驗條件、插拔位移曲線圖、壽命曲線圖、檢查報表…等等)
For all kinds of connectors in inserting and pulling force tests. With fixtures automatic core-finding device for accurate result. Windows Chinese(English) with data storage function. (test conditions, displacement curve, life curve and test report, etc.)
※ 夾治具Standard Clamp :
|
|
|
|
|
| Multi-function clamp and tips | Auto core-finding device for entire row | Oversized X-Y table. | Normal Force fixtures |
| Grounded/high-accuracy/ muitifunction Match with all kinds of tips Hold connectors precisely High-accuracy in testing |
testing | For large-scale moving test and retention force | Holding capacity $ 0.5- $4mm from single hold connectors |
※ 測試項目Test Items:
◆連接器單孔插拔試驗Connector single-hole inserting /pulling test.
◆連接器插拔壽命試驗Connector inserting/pulling life test.
◆端子與塑料保持力試驗Connector single-hole inserting /pulling test.
◆連接器正向力測試Connector Normal Force test.
◆各種壓縮、拉伸破壞試驗All kinds of compress, stretch destructive stage test.
※ 機器特點Teatures：
●測試條件皆由計算機畫面設定，快速且方便，并可儲存(含測試行程、速度、次數、空壓、暫停時間…….等等)。
All test conditions are stored and programmed by computer pictures. Select from list or input the figures directly for setting. (Including the testing items,movement direction, load range, stroke range, origin position, origin detector, speed, total frequency, pause time, waiting position and pre-running frequency)
●可記錄（儲存）并顯示每次測試之『插拔 - 位移』曲線圖。
Concurrent display Load-displacement and Life curves
●可儲存及打印圖形(荷重位移曲線圖及荷重衰減壽命曲線圖、檢驗報表)。
Direct printout and storage of the diagrams. (displacement curve, load force life curve and test report)
●可輸測試上、下限值，超出規格機器自動判定OK或NG。
Stop by limited values (Machine will stop once the figures are over the upper/lower limited values in life testing.)
●測試項目：荷重值、行程(1)(2)(3)之荷重值、荷重(1)(2)(3)之行程值、電阻值。
Test Items: Max. load value, peak value, bottom value, the load value of distance, the distance value of load, inserting point resistance value(opt.), loading or distance resistance values. (Opt.)
●荷重元超負載之硬件保護及軟件保護可確保荷重元不致損壞。
Load cells over-load protection against damage
●荷重單位顯示N 、lb 、g 、kg.可自由切換。
Auto load origin functions with load value settingSelectable units of N, Ib, gf and kgf.
●可同時搭配數個荷重元。
Several load cells can be selected (2kgf, 5kgf, 20kgf, 50kgf, 200kgf )(option)
| 機器規格型號 | |||
| 型號MODEL | 1220S | 1220HS | 1220WS |
| 位移最小解析Min.Stroke | 0.001mm | 0.001mm | 0.001mm |
| 兩柱距離Column interval | 200mm | 400mm | |
| 測試荷重種類Units | 200 kgf 、 50 kgf 、 20 kgf 、 5 kgf 、 2 kgf. | ||
| 最小讀值Load resolution | 0.1kgf、0.01kgf、1gf、0.2gf | ||
| 荷重精度Load accuracy | 0.2% FS | ||
| 測試高度Max. Stroke | 150mm | ||
| 測試速范圍Speed range | 1-200mm/min（1-600）mm/min | ||
| 傳動機構Transmission | 滾珠螺桿Ball Screw | ||
| 驅動馬達Drive motor | 伺服馬達Servo motor | ||
| 電壓Power | AC220V | ||
| 重量Weight | 85kg | 115kg | |
| 機器外觀尺寸Machine dimensions | 360WX260DX1050Hmm | 560W X 360D X 1050Hmm | |
| 控制器外觀尺寸Controller dimensions | 430WX500DX190Hmm | ||
※.測試報告Test Report
※ Pulling Load-distance Curve:
Directly display and store each displacement and load value variation. (Xis distance, Y is load)
Cross-shape cursor can trace the track of each test diagram, so as to determine the distance values of load and displacement. Minimum resolution is 0.01mm (0.001mm)
The curve can be stored in the computer for enlarging and shrinking at any time. Besides, "N" number of curve diagrams can also be designated on a single A4 size sheet.
Reel type curve diagram for browsing easily.
