測振記錄儀VB-8205SD特點
測試振動并實時記錄數據
實時數據記錄，保存數據到SD內存卡,可被EXCEL軟件讀取，不需要額外軟件
加速度：200m/s2
速度：200mm/s
頻率范圍：10Hz-1KHZ， 靈敏度符合ISO2954標準。
測振記錄儀VB-8205SD規格
| Circuit | Custom one-chip of microprocessor LSI | ||||
| circuit. | |||||
| Display | LCD size : 52 mm x 38 mm | ||||
| LCD with green backlight ( ON/OFF ). | |||||
| Measurement | Velocity, Acceleration, Displacement | ||||
| Function | RMS, Peak, Max. Hold. | ||||
| Unit | Measurement | Metric | Imperial | ||
| Acceleration | meter/s^2, G | ft/s^2 | |||
| Velocity | mm/s, cm/s | inch/s | |||
| Frequency | 10 Hz to 1 KHz | ||||
| range | * | Sensitivity relative during the | |||
| the frequency range meet ISO 2954 | |||||
| Refer to table 1, page . | |||||
| Circuit | Exclusive microcomputer circuit. | ||||
| Peak | To measure and update the peak | ||||
| Measurement | value. | ||||
| Max. Hold | To measure and update the max. peak | ||||
| Measurement | value. | ||||
| Zero Button, | Build in the Zero button and the Max. | ||||
| Max. Hold Rest | Hold reset button on front panel. | ||||
| Button | |||||
| Datalogger | Auto | 1 second to 3600 seconds | |||
| Sampling Time | @ Sampling time can set to 1 second, | ||||
| Setting range | but memory data may loss. | ||||
| Manual | Push the data logger button | ||||
| once will save data one time. | |||||
| @ Set the sampling time to | |||||
| 0 second. | |||||
| @ Manual mode, can also select the | |||||
| 1 to 99 position ( Location ) no. | |||||
| Memory Card | SD memory card. 1 GB to 16 GB. | ||||
| Advanced | * Set clock time ( Year/Month/Date, | ||||
| setting | Hour/Minute/ Second ) | ||||
| * Decimal point of SD card setting | |||||
| * Auto power OFF management | |||||
| * Set beep Sound ON/OFF | |||||
| * Set sampling time | |||||
| * SD memory card Format | |||||
| Data Hold | Freeze the display reading. | ||||
| Memory Recall | Maximum & Minimum value. | ||||
| Sampling Time | Approx. 1 second. | | |||
