BLD-KW17刀具抗彎曲測試儀

一、刀具抗彎曲測試儀主要功能：

1、通過抗彎測試作為刀具抗彎的判斷依據；

2、設計標準：ISO8442

二、主要技術參數：

1、 砝碼重量：10N±0.2N（2個砝碼）

2、 平衡導塊：89mm*30mm*15mm （.03mm）

3、 塑膠平行尺：380mm*8mm

4、 刻度板：180mm*350mm(外環角度50°）

5、 亞克力護罩：530mm*290mm*93mm

6、 外形尺寸：長*寬*高：607mm*386mm*470mm

三、操作步驟

1、 將處理好的樣品,固定在夾具上，使刀面與平行導塊平行；

2、 移動角度尺，調節標尺中線與角度尺中線平行；

3、 將砝碼掛在刀尖夾具下，扳動把手至砝碼懸空，保持10S后，卸下砝碼，查看其彎曲角度，如超過3°則不合格

BLD-KW17 tool bending tester

First, the main tool for bending resistance tester:

1, through the bending test as a tool to determine the basis of bending;

2, design standards: ISO8442

Two, the main technical parameters:

1, weight weight: 10N + 0.2N (2 weights)

2, balance guide block: 89mm*30mm*15mm (error 0.03mm)

3, plastic parallel ruler: 380mm*8mm

4, scale board: 180mm*350mm (outer ring angle 50 degrees)

5, acrylic shield: 530mm*290mm*93mm

6, external dimensions: length * width * height: 607mm*386mm*470mm

Three, operation steps

1, the processing of the sample, fixed on the fixture, so that the knife surface parallel with the parallel guide block;

2, the movement of the angle ruler, regulating the middle line of the ruler and the parallel line;

3, the weight hanging in the tip of the fixture, pull the handle to the weight of the suspension, to maintain the 10S, remove the weight, see its bending angle, such as more than 3 degrees are not qualified