AFG1000系列任意波形發生器提供了性價比波形生成工具。 它包括兩個雙通道型號，60MHz帶寬，10 Vp-p輸出幅度。4種運行模式、50種內置常用波形和內置200 MHz頻率計數器，滿足試驗和測試工作中的大多數波形發生需求。3.95英寸TFT LCD、快捷按鈕、USB接口和PC軟件提供了最直觀的儀器配置方式。

主要性能指標

• 雙通道，25 MHz或60 MHz正弦波形，12.5 MHz或30 MHz方波

• 14位，125 MS/s或300 MS/s任意波形，8 k點或1 M點記錄長度

• 幅度1 mVp-p ~ 10 Vp-p 至50 Ω負載

主要特點

• 連續模式、掃描模式、突發模式和調制模式(AM, FM, PM, ASK, FSK, PSK, PWM)滿足學生和其他用戶完成試驗/測試作業的大部分要求

• 64-MB 非易失內存，存儲任意波形

• 內置 6 位分辨率的 200 MHz 計數器為測量頻率/周期/脈寬/占空比提供了簡便精確的方式

• 標配 USB 主控/設備接口，用于擴大內存和遠程控制

• 利用外部 U 盤，免費 ArbExpress 使得編輯用戶自定義波形變得異常簡便

• 兼容 TekSmartLab™，輕松完成教學

• 標配 5 年保修

應用

• 電氣和電子實驗

• 通信實驗

• 傳感器仿真

• 功能測試

性能和特點

1 μHz ~ 25 MHz或60 MHz正弦波形范圍，12位或1 μHz分辨率和±1 ppm漂移高穩定性時基，在頻域中提供杰出的信號保真度。由于1 mVp-p到10 Vp-p輸出幅度范圍及整個頻率范圍內14位或1 mVp-p分辨率，您不必再在輸出幅度和頻率之間進行取舍。

四種不同的運行模式，利用經濟的解決方案，覆蓋大多數應用。內置50種的標準波形和任意波形，使用方便。 高達1 M點任意波形內存，用戶可以復現使用泰克示波器捕獲的或使用 ArbExpress定義的真實世界信號。 內置200 MHz和6位分辨率頻率計數器為測量頻率/周期/脈寬/占空比提供了簡便精確的方式。

易用性

高清3.95英寸彩色TFT顯示器用文本格式和圖形格式顯示相關設置和參數，讓用戶對其設置全面樹立信心，讓他們把重點放在手邊的任務上。前面板快捷按鈕和旋轉旋鈕可以用最少的工作和時間進入的功能和設置。內置64-MB非易失內存及U盤接口，為存儲用戶自定義波形提供無上限的空間。

The AFG1000 Series Arbitrary Function Generator provides a waveform generation tool with the best price performance ratio. It includes two models with dual channels, up to 60 MHz bandwidth and up to 10 Vp-poutput amplitude. The four run modes, 50 built-in frequently-used waveforms and the built-in 200 MHz frequency counter cover most waveform generation needs in your experiment and test jobs. The 3.95-inch TFT LCD, short-cut buttons, USB interface and PC software provide the most intuitive ways to configure the instrument.

Key performance specifications

• Dual-channel, 25 MHz or 60 MHz sine waveforms, 12.5 MHz or 30 MHz square waveforms

• 14 bits, 125 MS/s or 300 MS/s arbitrary waveforms with 8 k points or 1 M points record length

• Amplitude 1 mVp-p to 10 Vp-p into 50 Ω loads

Key features

• Continuous, sweeping, burst, and modulation modes (AM, FM, PM, ASK, FSK, PSK, PWM) covers most requirements for students and other users to get the experiments/test job done

• 64-MByte internal non-volatile memory for arbitrary waveform storage

• Built-in 200 MHz counter with 6-digit resolution offers an easy and precise way of frequency/period/pulse width/duty cycle measurement

• Standard USB host/device for memory expansion and remote control

• Free ArbExpress makes user defined waveforms editing extremely easy through an external USB memory stick

• Compatible with TekSmartLab™ for easy teaching and learning

• Standard 5-year warranty

Applications

• Electric and electronics experiments

• Communications experiments

• Sensor simulation

• Functional test

Specifications

All specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise.

Channels

• Number of channels

• 2

Built-in waveforms

• Built-in waveforms

• Sine, Square, Pulse, Ramp, Noise, and 45 frequently used arbitrary waveforms

General characteristics

• Sine waves

• 
  

• ?Range

• AFG1022	AFG1062
  1 μHz to 25 MHz	1 μHz to 60 MHz

• Sine wave in burst mode

• 2 mHz to 25 MHz

  2 mHz to 30 MHz

• Effective maximum frequency out

• 25 MHz

  60 MHz

• Amplitude flatness (1 Vp-p), typical

• <10 MHz

• ±0.4 dB

  ±0.5 dB

• ≥10 MHz and ≤25 MHz

• ±0.7 dB

• ≥10 MHz and ≤60 MHz

• ±0.9 dB

• Harmonic distortion (1 Vp-p)

• ≤10 MHz

• < -50 dBc

  < -60 dBc

• >10 MHz

• < -50 dBc

  < -47 dBc

• Total harmonic distortion

• < 0.2% (10 Hz to 20 kHz, 1 Vp-p)

• Spurious (1 Vp-p), typical

• < -45 dBc

• Phase noise, typical

• 1 MHz: < -110 dBc/Hz at 10 kHz offset, 1 Vp-p

• Residual clock noise, typical

• -57 dBm

• Square wave

• 
  

• ?Range

• AFG1022	AFG1062
  1 μHz to 12.5 MHz	1 μHz to 30 MHz

• Rise/fall time, typical

• <12 ns

  <10 ns

• Jitter (rms), typical

• <1 ns

  <500 ps

• Overshoot

• <5%

• Ramp wave

• 
  

• ?Range

• AFG1022	AFG1062
  1 μHz to 1 MHz	1 μHz to 2 MHz

• Linearity, typical

• ≤ 0.1% of peak output at 10% - 90% of amplitude range, at 1 kHz, 1 V p-p , 50% symmetry

• Symmetry

• 0.0% to 100.0%

• Pulse wave

• 
  

• ?Range

• AFG1022	AFG1062
  1 μHz to 12.5 MHz	1 μHz to 30 MHz

• Pulse width range

• 40 ns to 999 ks

  17 ns to 999 ks

• Pulse width resolution

• 1 ns or 4 digits

• Pulse duty

• <1 MHz, 0.1% to 99.9% (limitations of pulse duty width apply)
  ≥1 MHz, 50% fixed	≥1 MHz, 50% fixed

• Edge transition time, typical

• <12 ns, fixed

  <10 ns, fixed

• Overshoot, typical

• <5%

• Jitter (rms), typical

• <1 ns

  <500 ps

• Noise

• 
  

• ?Noise bandwidth (-3 dB)

• AFG1022	AFG1062
  25 MHz	50 MHz

• Noise type

• White Gausian

• DC

• 
  

• ?Range

• AFG1022	AFG1062
  -5 V to +5 V, 50 Ω load
  -10 V to + 10 V, open circuit or high Z load

• Arbitrary waveform

• 
  

• ?Range

• AFG1022	AFG1062
  1 μHz to 10 MHz	1 μHz to 30 MHz

• Arbitrary waveform in burst mode

• 2 mHz to 10 MHz

  2 mHz to 30 MHz

• Effective analog bandwidth (-3 dB)

• 30 MHz

  60 MHz

• Non-volatile memory

• 64 MByte

• Memory

• Length

• 2 to 8,192

  2 to 1 M-point

• Sampling rate

• 125 MS/s

  300 MS/s

• Vertical resolution

• 14 bits

• Rise and fall time

• < 10 ns

  < 8 ns

• Jitter (rms), typical

• < 6 ns

• Frequency

• 
  

• ?Resolution

• AFG1022	AFG1062
  1 μHz or 12 digits

• Internal reference stability

• ±1 ppm at 0 - 40 °C

• Internal reference aging

• ±1 ppm per year

• Amplitude

• 
  

• Range (50 Ω load)

• ? ≤25 MHz

• AFG1022	AFG1062
  1 mVp-p to 10 Vp-p	1 mVp-p to 10 Vp-p

• >25 MHz

• -	1 mV p-p to 5 V p-p

• ?Range (Open circuit or high Z load)

• ≤25 MHz

• 2 mVp-p to 20 Vp-p

  2 mV p-p to 20 V p-p

• >25 MHz

• -	2 mV p-p to 10 V p-p

• Accuracy

• ±(1% of setting +1 mVp-p), (1 kHz sine waveform, 0 V offset)

• Resolution

• 1 mVp-p, 1 mVrms or 4 digits

• Units

• Vp-p, Vrms

• Output impedance

• 50 Ω (typical)

• Local impedance setting

• Selectable: 50 Ω, 1 Ω to 10.000 kΩ, High Z (adjusts displayed amplitude according to selected load impedance)

• Isolation

• No floating ground, signal ground connected to chassis ground

• Signal output protection

• Short-circuit tolerance, main output automatically disabled when over current

DC offset

• Range

• ±(5 Vpk– Amplitudep-p/2), 50 Ω load

  ±(10 Vpk– Amplitudep-p/2), open circuit or high Z load

• Accuracy

• ±(1% of |setting| + 1 mV + 0.5% of amplitude (Vp-p))

• Resolution

• 1 mV or 4 digits

Modulation

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

• Amplitude modulation

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, noise, arbitrary

• Internal AM frequency

• 2 mHz to 20 kHz

• Depth

• 0.0% to 100.0%

• Frequency modulation

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, noise, arbitrary

• Internal modulating frequency

• 2 mHz to 20 kHz

• Frequency deviation

• (limited by carrier waveform type)

  AFG1022	AFG1062
  2 mHz to 12.5 MHz	2 mHz to 30 MHz

• Phase modulation

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, noise, arbitrary

• Internal PM frequency

• 2 mHz to 20 kHz

• Phase Deviation

• 0° to 180°

• Amplitude shift keying

• (AFG1062 only)

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• 50% duty cycle square

• ASK rate

• 2 mHz to 100 kHz

• Frequency shift keying

• 
  

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• 50% duty cycle square

• FSK rate

• 2 mHz to 100 kHz

• Phase shift keying

• (AFG1062 only)

• Carrier waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• Source

• Internal / external

• Internal modulating waveforms

• 50% duty cycle square

• PSK rate

• 2 mHz to 100 kHz

• Pulse width modulation

• (AFG1062 only)

• Carrier waveforms

• Pulse, ≤1 MHz

• Source

• Internal / external

• Internal modulating waveforms

• Sine, square, ramp, arbitrary, except DC and noise

• PWM frequency

• 2 mHz to 20 kHz

• Deviation

• 0.0% to 50.0% of pulse period

Sweeping

Modulation, sweeping, and burst modes are only available for channel 1 on the AFG1022.

The AFG1062 supports equal strong channels with modulation, sweeping, and burst modes.

• Carrier waveforms

• Sine, square, ramp, arbitrary (AFG1062 only)

• Minimum start-stop frequency

• 1 μHz

• Maximum start-stop frequency

• 
  

• ?Sine

• AFG1022AFG1062關鍵詞：任意波形發生器 頻率計 傳感器 標準 示波器