Thorlabs 臺式光功率能量計表頭，雙通道
PM5020雙通道光功率能量計表頭接合一個或兩個探頭可測量連續波和調制光源。此表頭兼容超過35種功率、位置和能量探頭。與這些探頭一起使用時，表頭可以自動檢測并讀取存儲在探頭接頭中的探頭校準信息，并將這些數據與用戶設置的測量波長相結合，以提供校準的功率或能量測量值。
Thorlabs 臺式光功率能量計表頭，雙通道
產品特性
● 5英寸大尺寸觸摸顯示屏，WVGA分辨率
● 內置的GUI功能：
○ 測量連續光和調制光
○ 快速采集機載和遠程數據，zui,快 達到100 kS/s
○ 將用戶提供的光譜校準和衰減校正數據應用于測量過程
○ 內置計算器可以執行跨通道數學函數
● 交互式GUI可供下載，以演示所有前面板功能(查看交互式演示標簽)
● 設備輸入/輸出：
○ 可配置的模擬輸出
○ 光學快門控制
○ zui,多 連接兩個外部溫度探頭和兩個風扇
○ 數字I/O接口，包括用戶可訪問的I2C總線
○ 通過USB、Ethernet或RS232實現遠程操作和網絡功能
● 通過同一網絡內PC上的Web瀏覽器查看表頭測量值
● 兼容Thorlabs所有C系列探頭
● 提供光功率監測PC軟件
● 單通道和雙通道測量
● 通過觸摸屏和儀器控件都可以操作所有功能
● 通過USB、Ethernet或RS232實現遠程操作和網絡功能
● 8 GB內存
| Item #a | PM5020 |
|---|---|
| Compatible Sensors | Photodiode Power, Thermal Power, Thermal Position and Power, and Pyroelectric Energy |
| Number of Channels | 2 |
| Optical Power Rangeb | 100 pW to 200 W |
| Optical Energy Rangeb | 10 µJ to 15 J |
| Available Sensor Wavelength Rangeb | 185 nm - 25 μm |
| Display Refresh Rate | 25 Hz |
| Bandwidtha | DC - 250 kHz |
| Photodiode Sensor Measurement Rangeb,c | 2 nA - 10 mA |
| Thermopile Sensor Measurement Rangeb,c | 2 mV - 1 V |
| Pyroelectric Sensor Measurement Rangeb,c | 20 mV - 100 V |
a. 與探頭相關
b. 范圍可以選擇用Watts(光電二極管和熱電堆)或Joules(Pyroelectric)表示。
規格
| Specificationsa | |
|---|---|
| Display | |
| Type | Graphical IPS LCD with Touch, 854 x 480 Pixels |
| Format | Numerical, Bargraph, Needle, Graph Power/Position/Temperature, Statistics |
| Size | 5.0" (4.32" x 2.43", 109.7 mm x 61.6 mm) |
| Update Rate | 25 Hz |
| Sensor Interface | |
| Compatible Sensors | Thorlabs' C-Series Photodiode, Thermal Power, Thermal Position & Power, and Pyroelectric Sensors Photodiodes up to 10 mA Thermopiles up to 1 V Pyroelectric Sensors up to 100 V See Table Below for Additional Details |
| Channels | 2 |
| Input Connectors | Two DE-9 Female, Back Panel (Compatible with C-Series Connectors) |
| External Trigger | |
| Connector | BNC, Front Panel (TTL 5 V Max) 10-Pin PCB, Back Panel (TTL 5 V Max) |
| Analog Outputs | |
| Connector | Two BNC, Back Panel |
| Signal | CH1, CH2 Amplified, Corrected Input Signal |
| Voltage Range | -2.5 V to 10 V |
| Bandwidth | Up to 250 kHz, Dependent on Sensor and Settings |
| Programmable Analog Output | |
| Connector | Four BNC, Back Panel |
| Signal | Selectable: CH1; CH2; CH1-CH2; CH1/CH2; Position X, Y |
| Voltage Range | -5 to 10 V; Programmable Gain and Offset |
| Bandwidth | Up to 1 kHz, Dependent on Sensor and Settings |
| Shutter Control | |
| Type | Support for SH05R(/M) or SH1(/M) Optical Shutter with Interlock Input |
| Connector | Hirose HR10-7R-6S, 2.5 mm Mono Audio |
| Power Rating | 15 V, 0.5 A |
| Temperature Control | |
| Type | NTC |
| Connector | 2 Channels: 2.5 mm Stereo Audio and 10-Pin PCB (Back Panel) |
| Digital I/O | |
| Type | 4 Configurable I/O Channels, 1 Trigger In/Output, I2C (LVTTL / TTL) |
| Connector | 10-Pin PCB, Back Panel |
| Fan Control | |
| Type | 2 Channels, Voltage or rpm Control (12 V, 0.25 A) |
| Connector | 10-Pin PCB, Back Panel |
| Power Rating | 12 V, 0.25 A |
| Interface | |
| Type 1 | USB 2.0 |
| Connector | USB B, Back Panel |
| Type 2 | Ethernet |
| Connector | RJ45, Back Panel |
| Type 3 | Serial RS232 |
| Connector | DE-9 Female, Back Panel |
| Power Supply | |
| Line Voltage | 100 to 240 V |
| Line Frequency | 50 to 60 Hz |
| Maximum Power Consumption | 30 W |
| Mains Supply Overvoltage | Category II (Cat II) |
| General | |
| Dimensions (W x H x D) | 253.2 mm x 110.6 mm x 293.6 mm (9.97" x 4.35" x 11.56") |
| Weightb | 2.6 kg |
| Mounting Options | Benchtop |
| Operating Temperature Rangec | 0 to 40 °C |
| Storage Temperature Range | -40 to 70 °C |
| Relative Humidity | Max 80% up to 31 °C, Decreasing to 50% at 40 °C |
| Pollution Degree (Indoor Use Only) | 2 |
| Operation Altitude | < 2000 m Above Sea Level |
a. 所有規格都在23 ± 5°C和相對濕度45 ± 15%(不冷凝)的條件下有效。
b. 這是PM5020功率計除去所有配發的附件之后的重量。
c. 不冷凝
探頭兼容性規格
| Item # | PM5020 | ||
|---|---|---|---|
| Detector Compatibility | Photodiode Power Sensors | Thermal Power Sensors Thermal Position & Power Sensors | Pyroelectric Energy Sensors |
| Measurement Ranges | 21 Ranges: 2 nA to 10 mA Ranges Selectable in W or A, Sensor Dependent | 9 Ranges: 2 mV to 1 V Ranges Selectable in W or V, Sensor Dependent | 12 Ranges: 20 mV - 100 V Ranges Selectable in J or V, Sensor Dependent |
| Wavelength Ranges | 200 nm - 1800 nm (Sensor Dependent) | 190 nm - 25 μm (Sensor Dependent) | 185 nm - 25 μm (Sensor Dependent) |
| Power / Energy Ranges | 100 pW - 20 W (Sensor Dependent) | 100 μW - 200 W (Sensor Dependent) | 10 μJ - 15 J (Sensor Dependent) |
| Bandwidth | DC - 250 kHz, Dependent on Sensor and Settings | DC - 1 kHz, Dependent on Sensor and Settings | N/A |
| Max Repetition Rate | N/A | N/A | 80 kHz |
| Wavelength Correction | Sensor Dependent; nm (A/W) | Sensor Dependent; nm (V/W) | Sensor Dependent; nm (V/J) |
| Units | W, dBm, W/cm2, lx, A | W, dBm, W/cm2, V | J, J/cm2, W, W/cm2 |
| Accuracy | ±0.2% of Full Scale (1 µA - 10 mA Ranges) ±0.5% of Full Scale (2 nA - 400 nA Ranges) | ±0.5% of Full Scale | ±0.5% of Full Scale |
| Display Resolution | 0.1 pA / Responsivity Value (A/W) | 0.1 µV / Responsivity Value (V/W) | 1 µV / Responsivity Value (V/J) |
Thorlabs 臺式光功率能量計表頭，雙通道
PM5020雙通道光功率能量計表頭接合一個或兩個探頭可測量連續波和調制光源。此表頭兼容超過35種功率、位置和能量探頭。與這些探頭一起使用時，表頭可以自動檢測并讀取存儲在探頭接頭中的探頭校準信息，并將這些數據與用戶設置的測量波長相結合，以提供校準的功率或能量測量值。而且，此表頭還可以與滿足規格標簽上所列兼容性要求的第三方或自定探頭一起使用。
森泉為您的科研事業添磚加瓦：
激光控制：激光電流源、激光器溫控器、激光器控制、伺服設備與系統等等
探測器：光電探測器、單光子計數器、單光子探測器、CCD、光譜分析系統等等
定位與加工：納米定位系統、微納運動系統、多維位移臺、旋轉臺、微型操作器等等
光源：半導體激光器、固體激光器、單頻激光器、單縱模激光器、窄線寬激光器、光通訊波段激光器、CO2激光器、中紅外激光器、染料激光器、飛秒超快激光器等等
光機械件：用于光路系統搭建的 gao 品 zhi 無應力光機械件，如光學調整架、鏡架、支撐桿、固定底座等等
光學平臺：主動隔振平臺、氣浮隔振臺、實驗桌、剛性工作臺、面包板、隔振、隔磁、隔聲綜合解決方案等等
光學元件：各類晶體、光纖、偏轉鏡、反射鏡、透射鏡、半透半反鏡、濾光片、衰減片、玻片等等
染料：激光染料、熒光染料、光致變色染料、光致發光染料、吸收染料等等
