8630系列高精度扭矩傳感器
堅固，可靠，易于操作，高度準確，極其緊湊的設計，用于靜態和準靜態測量（非旋轉）
-
Features
- 量程范圍 從0 ...±2 N·m 到 0 ... ±200 N·m
- 非線性度≤ 0.1 % F.S
- 信號輸出也可選 ±10V或 USB 或mV/V
- 清零功能，濾波和平均值設置
-
Product data
工作方式F 非旋轉 可選量程F 0 … ± 2 N·m
0 … ± 5 N·m
0 … ± 10 N·m
0 … ± 20 N·m
0 … ± 50 N·m
0 … ± 100 N·m
0 … ± 200 N·m信號輸出F 0 ... ±10 V incl. configuration USB
0 ... ±10 V incl. USB configuring and measuring USB
Standardized output signal (mV/V)
Standardized output signal (mV/V) with TEDS安裝方式F Internal square/External square
Internal square/Flange-mounted
Internal square/incl. Bracket-mounted電氣連接F 7 針接口或 Micro-USB (選配) 保護等級F IP40 使用溫度F -20 °C ... +80 °C 集成放大器和USB輸出的
-20 °C ... +60 °C優勢特征F - 標準化輸出信號
- 極其緊湊的設計
-
Description
This high-precision torque sensor can be used to perform both static and dynamic measurements on non-rotating parts. The internal and external square drive design make this sensor especially easy to fit in existing or new screw-fitting applications.
Quality assurance and monitoring of screw-fastening tools are just two applications that can take full advantage of sensor features such as USB port, built-in amplifier and side-load absorbing bearings.
With no rotating parts, this sensor needs no maintenance when used correctly.
Available accessories include mounting brackets and flange adapters, which enable quick, easy and practical integration of the sensor into existing or newly developed setups and test benches.
The strain-gauge based sensor’s modular design allows precise configuration for the desired application.
With the integrated amplifier option, the sensor directly supplies a voltage signal of 0 ... ± 10 V that is proportional to the torque. The sensor can be configured via the micro-USB interface, providing access to, for example, a filter frequency setting, averaging, and a tare function. Measurements via USB in addition to the voltage output are available with the USB measurement option. The sensor comes with the DigiVision software for performing measurements and data archiving, with drivers additionally available e.g. for LabVIEW. Integration into custom software is possible via DLL. Examples can be found on our website .
The burster TEDS option (electronic data sheet, memory chip with sensor-specific data) allows rapid configuration of compatible evaluation units (instrumentation amplifier, indicator, ...).
-
Downloads
Data sheet
8630參數資料 EN
