詳情介紹：
DL - 8805 加硫成型機
MOLDING TEST PRESS
本機試法是將原料放于鑄模內，夾于本機電熱平板間，加以壓力及溫度，使原料成型，以供試驗，做為工廠大量生產配料之依據。
This machine is very convenient for preparing test specimens。Put raw materials into cast die and clamp the die between the electric heating plates of the machine，then apply heat and compress int in order to mold the raw materials to get the specimens for testing in laboratory and being the standard in mass production。
MOLDING TEST PRESS
本機試法是將原料放于鑄模內，夾于本機電熱平板間，加以壓力及溫度，使原料成型，以供試驗，做為工廠大量生產配料之依據。
This machine is very convenient for preparing test specimens。Put raw materials into cast die and clamp the die between the electric heating plates of the machine，then apply heat and compress int in order to mold the raw materials to get the specimens for testing in laboratory and being the standard in mass production。
容量選擇 Capacity | 10，30，50 噸 ton（option） |
溫度 Temperature | 常溫 Room temp. ~ 300℃ |
計時器 Timer | 電子式 Electronic type 0 ~ 99（min） |
電熱板面積 Heat plate area | 22.5 x 22.5cm |
電熱板間距 Heat plate space | 0 ~ 100mm |
電源 Power | AC220V / 50Hz |
