| | | | | |
| | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | HI1710A微波測量系統采用50/60Hz，100-240V的具有瞬變保護裝置的電路供電，操作儀器的面板的電源開關即可打開或和關閉儀器，儀器提供二個不同時間響應特性，符合CDRH的CFR 1030.10微波爐的性能標準要求的快速自動掃描系統。 | |
| | | | | HI1710A微波測量系統探頭（HI2623）是一個直徑為5cm的圓錐體，滿足CDRH性能標準要求，通過電纜連接儀器面板接口，從HI1710A讀出數據。 | |
| | | | | HI1710A微波測量系統具體模擬圖形顯示，數字報警設置，RS232接口連接計算機進行控制，打印機接口，模擬信號輸出。通過RS232接口，在實驗室可以探訪到所有測試數據，實現半自動產品檢測質量保證系統。峰值保持和清零按鍵使測量更加準確，重現性更好。 | |
| | | | | | |
| | | | | 特性： | |
| | | | | 校準：2450MHz.在ISM（工業、科學及醫療設備）范圍內 | |
| | | | | 量程：4量程，分別為0-1, 0-2, 0-5, 0-10mW/cm2。 | |
| | | | | 響應特性： F1 (慢速) –小于3秒 | |
| | | | | F2 (快速) – 小于1秒 | |
| | | | | 功率密度：2.0 W/cm2 (2000mW/cm2) | |
| | | | | 輸入功率:100-240V，0.8-0.4A（max.），50-60Hz | |
| | | | | 保險絲：250V,1.0A,型號T (5 mmx20mm) | |
| | | | | 輸入控制： | |
| | | | | Zero調零位-干燥開關關閉到零。 | |
| | | | | RS-232-標準通信輸入。 | |
| | | | | 控制輸出: | |
| | | | | Alarm Output報警輸出- 從背部面板連接（Alarm Output24V 1 Amp） | |
| | | | | analog output模擬輸出：從背部面板連接（analog output 4 VDC max. 1 mA max.）。 | |
| | | | | RS-232 ：從背部面板連接（RS-232）標準通信輸出。 | |
| | | | | 環境: | |
| | | | | 溫度：15- 40℃ | |
| | | | | 濕度: 5%-95%，無冷凝 | |
| | | | | 尺寸：311x254x127mm | |
| | | | | 探頭：（HI2623） | |
| | | | | 探頭長度: 305mm | |
| | | | | 電纜: 2.74米 | |
| | | | | 運輸重量:3.6 KG | |
| | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | | |
| | | | | HI-1710A Microwave Oven Survey Meter | |
| | | | | The HI-1710A combines the proven and reliable diode sensing technology of the Holaday Microwave Survey Meters with the digital processing techniques developed for automatic oven scanning. | |
| | | | | Key Features | |
| | | | | Analog bar graph | |
| | | | | Auto-ranging | |
| | | | | Digital Alarm Set | |
| | | | | Optional Remote Zero | |
| | | | | Removable Sensing Probe | |
| | | | | RS-232 Interface | |
| | | | | Serial Printer Output | |
| | | | | Description | |
| | | | | The RS232 interface allows easy adapting of the unit to computerized data acquisition in laboratory studies and semi-automatic production test systems. Digital Peak-Hold and Push Button Zeroing aid in improving testing productivity and reducing errors. Digital filters, selected from the front panel, provide the “Fast” or “Slow” responses familiar to analog survey instrument users. Built in self-test sequences test meter performance at turn-on and each time the meter is zeroed. Diagnostic functions accessed from the front panel give quick indications of meter status. | |
| | | | | Product Testing | |
| | | | | On power-up, the HI-1710A is automatically configured for normal production testing, relieving the operator of a complicated setup operation. Simply activating the Peak-Hold feature from the front panel and adding a serial printer results in a formatted RF leakage report each time the ZERO key is pressed. With the Remote Zero Option, testing and reporting are accomplished without reaching to touch the instrument or setting down the probe for even greater operator efficiency. The Remote Zero Chamber provides a location shielded from stray RF fields by simply inserting the probe. An optional alarm output contact transfer provides remote signaling capability (24 VAC, 1A). The separable probe/pre-amp assembly (HI-2623) means that daily ellipticity checks and periodic calibration checks can be made without removing the instrument from service. Spare probes, available from Holaday, can be pre-checked for immediate exchange with no meter down time. Auto-ranging and the bar graph display make it quicker and easier for the operator to accurately perform oven leakage testing. | |
| | | | | Laboratory Measurement | |
| | | | | The HI-1710A is ideally suited for engineering studies with a 0-1Vdc analog output for chart recorders and plotters. The remote control and reading features allows use in many automated data acquisition configurations. | |
| | | | | Standard Configuration | |
| | | | | Digital Alarm Set | |
| | | | | RS232 Interface for Computer Control | |
| | | | | Electrical Specifications | |
| | | | | Frequency：2450 MHz | |
| | | | | Ranges：0-1, 0-2, 0-5, 0-10 mW/cm2 | |
| | | | | Physical Specifications | |
| | | | | Cable length：1.2 m (3.94 ft) | |
| | | | | Probe Length：30 cm (11.81 inches) | |
| | | | | Specifications | |
| | | | | Power Supply：100 - 240 VAC 50/60 Hz |
