PRZ6000型全自動石油產品熱值測定儀
概述：
適用于測量電力、煤炭、冶金、石化、質檢、環保、水泥、造紙、地勘、科研院等行業部門測量煤炭、焦炭、石油、水泥生料，磚坯及其它固體或液體等可燃物的發熱量，符合國標GB/T213-2008《煤的發熱量測定方法》、GB/T384-1988《石油產品熱值測定法》的要求。
特點:
概述：
適用于測量電力、煤炭、冶金、石化、質檢、環保、水泥、造紙、地勘、科研院等行業部門測量煤炭、焦炭、石油、水泥生料，磚坯及其它固體或液體等可燃物的發熱量，符合國標GB/T213-2008《煤的發熱量測定方法》、GB/T384-1988《石油產品熱值測定法》的要求。
特點:
采用微機實現測量過程的自動控制和計算，系統采用Windows XP操作系統，操作全過程漢字提示，人機交互，即學即用，按提示操作即可完成試驗。在測試的同時可進行數據處理、數據查詢、數據修改等其它工作，功能*，使用方便。
高度自動化，自動點火、自動注、排水，自動稱水重、調水溫、只需裝好氧彈，儀器便可完成全部測試工作。
電腦控制自動標定儀器熱容量，輸入相關數據，微機自動換算被測物質的高低位發熱量,自動存盤并打印結果。
電腦控制自動標定儀器熱容量，輸入相關數據，微機自動換算被測物質的高低位發熱量,自動存盤并打印結果。
采用串口通信技術，故障率低，自動保護，自動診斷，使用環境寬松。測量精度高分析快，精密測溫探頭，實時顯示溫度-時間曲線，方便直觀。
低故障率，自保護、自診斷技術、故障查找快捷、便于維護。
簡便易用，界面友好，軟件容錯性好，易學易用。
結果準確，采用*的冷卻校正體系，保證儀器性能的測試穩定性。
6000型微機全自動量熱儀作為單筒量熱儀系統使用，若對兩臺熱量計進行異步控制，請選用6000B微機全自動(雙控)量熱儀系統。
技術指標及參數:
使用環境：5-40℃
熱容量：約10500J/K
分辨率：0.0001℃
測量精度:符合GB/T 213－2008要求
測試時間：15min左右
外水筒容量 30L
內水筒容量 約2.3L
點火電壓 24V
點火時間 6分鐘點火
定量誤差：≤±1g
測量誤差：優于國標
主機功耗：≤40W
電源電壓：AC220V±10％50Hz
PRZ6000 automatic petroleum product calorimeter
Overview:
Applicable to the measurement of electricity, coal, metallurgy, petrochemical, quality inspection, environmental protection, cement, paper, geological exploration, scientific research institutes and other industries to measure coal, coke, petroleum, cement raw materials, bricks and other solid or liquid combustibles The calorific value is in line with the requirements of GB/T213-2008 "Determination method of calorific value of coal" and GB/T384-1988 "Measurement method of calorific value of petroleum products".
Features:
The microcomputer is used to realize the automatic control and calculation of the measurement process. The system adopts the Windows XP operating system, and the whole process of Chinese characters prompts, human-computer interaction, that is, ready to use, and the test can be completed according to the prompt operation. In the test, data processing, data query, data modification and other work can be performed, and the function is superior and convenient to use.
Highly automated, automatic ignition, automatic injection, drainage, automatic weighing water, water temperature adjustment, just install a good oxygen bomb, the instrument can complete all testing work.
The computer control automatically calibrates the heat capacity of the instrument, inputs relevant data, and the microcomputer automatically converts the high and low heat of the measured substance, automatically saves the disk and prints the result.
Adopt serial communication technology, low failure rate, automatic protection, automatic diagnosis, and relaxed use environment. High measurement accuracy, fast analysis, precision temperature probe, real-time display of temperature-time curve, convenient and intuitive.
Low failure rate, self-protection, self-diagnosis technology, quick fault finding and easy maintenance.
Easy to use, friendly interface, good software fault tolerance, easy to learn and use.
The results are accurate, using a unique cooling correction system to ensure the test stability of the instrument performance.
The 6000-type microcomputer automatic calorimeter is used as a single-tube calorimeter system. If the two calorimeters are controlled asynchronously, please use the 6000B microcomputer automatic (double control) calorimeter system.
Technical indicators and parameters:
Use environment: 5-40 ° C
Heat capacity: about 10500J/K
Resolution: 0.0001 °C
Measurement accuracy: in line with GB/T 213-2008 requirements
Test time: 15min or so
Outer water tank capacity 30L
The inner water tank capacity is about 2.3L
Ignition voltage 24V
Ignition time 6 minutes ignition
Quantitative error: ≤ ± 1g
Measurement error: better than the national standard
Host power consumption: ≤40W
Power supply voltage: AC220V±10%50Hz
主機功耗：≤40W
電源電壓：AC220V±10％50Hz
PRZ6000 automatic petroleum product calorimeter
Overview:
Applicable to the measurement of electricity, coal, metallurgy, petrochemical, quality inspection, environmental protection, cement, paper, geological exploration, scientific research institutes and other industries to measure coal, coke, petroleum, cement raw materials, bricks and other solid or liquid combustibles The calorific value is in line with the requirements of GB/T213-2008 "Determination method of calorific value of coal" and GB/T384-1988 "Measurement method of calorific value of petroleum products".
Features:
The microcomputer is used to realize the automatic control and calculation of the measurement process. The system adopts the Windows XP operating system, and the whole process of Chinese characters prompts, human-computer interaction, that is, ready to use, and the test can be completed according to the prompt operation. In the test, data processing, data query, data modification and other work can be performed, and the function is superior and convenient to use.
Highly automated, automatic ignition, automatic injection, drainage, automatic weighing water, water temperature adjustment, just install a good oxygen bomb, the instrument can complete all testing work.
The computer control automatically calibrates the heat capacity of the instrument, inputs relevant data, and the microcomputer automatically converts the high and low heat of the measured substance, automatically saves the disk and prints the result.
Adopt serial communication technology, low failure rate, automatic protection, automatic diagnosis, and relaxed use environment. High measurement accuracy, fast analysis, precision temperature probe, real-time display of temperature-time curve, convenient and intuitive.
Low failure rate, self-protection, self-diagnosis technology, quick fault finding and easy maintenance.
Easy to use, friendly interface, good software fault tolerance, easy to learn and use.
The results are accurate, using a unique cooling correction system to ensure the test stability of the instrument performance.
The 6000-type microcomputer automatic calorimeter is used as a single-tube calorimeter system. If the two calorimeters are controlled asynchronously, please use the 6000B microcomputer automatic (double control) calorimeter system.
Technical indicators and parameters:
Use environment: 5-40 ° C
Heat capacity: about 10500J/K
Resolution: 0.0001 °C
Measurement accuracy: in line with GB/T 213-2008 requirements
Test time: 15min or so
Outer water tank capacity 30L
The inner water tank capacity is about 2.3L
Ignition voltage 24V
Ignition time 6 minutes ignition
Quantitative error: ≤ ± 1g
Measurement error: better than the national standard
Host power consumption: ≤40W
Power supply voltage: AC220V±10%50Hz
