德國奧萊斯OLES進口鍛鋼高壓球閥

【進口鍛鋼高壓球閥】詳細說明：

鍛鋼高壓球閥主要適用于火力電站各種系統的管路上，切斷或接通管路介質。適用介質:水、蒸氣等非腐蝕性介質。鍛鋼閥門與其他閥門產品相比的特點是高溫高壓，*的自密封設計，壓力越高，密封越可靠。由于性能技術特性、工況的特殊使產品也形成了其他產品所替代不了的特點。法蘭高壓球閥常常忽視注脂量的問題。注脂槍加油后，操作人員低溫截止閥選擇閥門和注脂聯結方式后，進行注脂作業。

Forged steel high-pressure ball valves are mainly suitable for cutting off or connecting pipeline media in various systems of thermal power plants. Applicable media: water, steam and other non-corrosive media. Compared with other valve products, forged steel valves are characterized by high temperature and pressure, unique self-sealing design, the higher the pressure, the more reliable the sealing. Because of the special characteristics of performance and technology and working conditions, the products also have the characteristics that other products can not replace. Flanged high pressure ball valves often neglect the problem of fat injection. After the greasing gun is refueled, the operator chooses the valve and the connecting mode of the low-temperature globe valve, and then carries out the greasing operation.

【進口鍛鋼高壓球閥】特點：

1、提高前輩的閥座：聚多年球閥制造經驗而設計的閥座，確保閥門密封，磨擦系數低，操縱力矩小、多種閥座材料、適應范圍廣。

2、開關無誤的手柄：采用扁頭閥桿，與手柄的連接不會錯位，從而保證手柄指示的開關狀態與閥*辭。

3、鎖緊裝置：為防止閥門開關誤操縱，在閥門全開、全關位置有鎖定孔，確保閥門處于準確的位置。

4、閥桿防飛結構：閥桿為下裝式，防止受壓飛出，同時可在火災后，與閥體形成金屬接觸，確保閥桿密封。

【進口鍛鋼高壓球閥】工作原理;

高壓球閥它具有旋轉90度的動作，旋塞體為球體，有圓形通孔或通道通過其軸線。球閥在管路中主要用來做切斷、分配和改變介質的流動方向，它只需要用旋轉90度的操作和很小的轉動力矩就能關閉嚴密。球閥適宜做開關、切斷閥使用，但近來的發展已將球閥設計成使它具有節流和控制流量之用，如V型球閥。