CMP電纜夾套（CMP Sapphire SHDSS cable cleat ）
上海頤品自動化科技有限公司，：
CMP電纜夾套（CMP Sapphire SHDSS cable cleat ）
上海頤品自動化科技有限公司，：
The CMP Products Sapphire cable cleat range consists of metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914:2009. The range has been designed and tested for high short circuit conditions on cables held in single, parallel / flat formation, to ensure the securing and retention of cables without damage.
The Sapphire cable cleat is available for single parallel formation and for diameters of 26 to 150mm in 12 sizes and is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.
With one M12 and two M10 fixing clearance holes within its base, the Sapphire range allows versatility to the installer during installation, and is designed to enable the product to be secured to a variety of mounting surfaces. The cable cleat hinge opens fully, allowing the cables to be easily placed within the cable cleat, to aid the installer before closing and securing via the mouth piece bolt.
The Sapphire cable cleats come with liners as standard, helping to restrain the cables within vertical applications, providing a layer of protection between the cable sheath and the cable cleat during normal operation, where thermal elongation of cable occurs, protecting the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cables in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.
- Third party certification to IEC 61914:2009
- 316L stainless steel
- 26 to 150mm in 12 sizes for single / parallel formation
- Operating temperature -50°C to +60°C
- Standard liners which are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
- Combined single (M12) and two bolt (M10) fixing design
| Short Circuit Testing to IEC 61914:2009 - Clause 9.5 | |||
| Multicore Formation | Parallel Formation | ||
| One short circuit (6.4.3) 600mm fixed cleat centres | Two short circuits (6.4.4) 600mm fixed cleat centres | One short circuit (6.4.3) 600mm fixed cleat centres 105mm cable centres | Two short circuits (6.4.4) 600mm fixed cleat centres 105mm cable centres |
| 0.1 sec | 0.1 sec | 0.1 sec | 0.1 sec |
| 105kA Peak | 105.4kA Peak | 110kA Peak | 109kA Peak |
| 50.0kA RMS | 50.0kA RMS | 50.0kA RMS | 50.0kA RMS |
PRODUCT SELECTION TABLE
CLICK HERE TO VIEW TECHNICAL ILLUSTRATION
TECHNICAL ILLUSTRATION
Showing: Imperial Metric
| Part No. | Cable Ø range take (mm) | Dimensions mm | Weight (g) | |||||
| W | H | D | P | Fixing Hole Ø | ||||
| D1 | D2 | |||||||
| SHDSS026032 | 26-32 | 95.0 | 88.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 402 |
| SHDSS032038 | 32-38 | 96.0 | 93.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 431 |
| SHDSS038046 | 38-46 | 100.0 | 100.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 446 |
| SHDSS046051 | 46-51 | 104.0 | 103.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 456 |
| SHDSS051058 | 51-58 | 108.0 | 107.0 | 54.0 | 25.0 | 2 x M10 | 1 x M12 | 472 |
| SHDSS058070 | 58-70 | 129.0 | 119.0 | 54.0 | 50.0 | 2 x M10 | 1 x M12 | 554 |
| SHDSS070083 | 70-83 | 137.0 | 120.0 | 54.0 | 50.0 | 2 x M10 | 1 x M12 | 581 |
| SHDSS083097 | 83-97 | 157.0 | 137.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 665 |
| SHDSS096109 | 96-109 | 165.0 | 133.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 688 |
| SHDSS106120 | 106-120 | 170.0 | 142.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 713 |
| SHDSS120135 | 120-135 | 197.0 | 157.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 814 |
| SHDSS135150 | 135-150 | 205.0 | 172.0 | 54.0 | 75.0 | 2 x M10 | 1 x M12 | 847 |
中國區(qū)分銷商：
上海頤品自動化科技有限公司
Shanghai Epin Automation Co.,Ltd.
Website:www.epinautomation。。ｃｏｍ
:sales@epinautomation.com
*:
因?yàn)閷I(yè)，所以放心！
